back to used gear

Product Ref U84

See picture left and below

CSS TIME CODE RESOLVER

MODEL 102 S/N 1023

FOR 4S TC STEREO NAGRA SYNC PLAYBACK

This is an equivalent unit to the QSLS SYNCHRONIZE and the QSLS INTERFACE but all in one box

Take the time code link plug out of the Nagra pilot socket and plug into this resolver.

This unit was made by Cooper Sound Services.

See picture below

This is the Nagra type

Nagra QSLS INTERFACE is an external accessory for Nagra IV-S TC. It complements the QSLS SYNCHRONIZE in order to control device playback, by comparing SMPTE Time Code, which is read from tape with TC delivered by internal generator. The QSLS INTERFACE is set between Nagra and QSLS SYNCHRONIZE, to converts read TC signal into pilot signal for the QSLS SYNCHRONIZE and, conversely, converts compensation signal delivered by the QSLS INTERFACE, into a signal compatible with SMPTE reading boards of the Nagra IV-S TC. Here again, one will not forget to screw on the crystal jumper plug to the QSLS SYNCHRONIZE, if not so, sync control is inoperative.

 

See left picture

This is the Nagra QSLS SYNCHRONIZER. and the QSLS INTERFACE that you need if you don't have the CCS sync box.

The QSLS SYNCHRONIZER was made for sync playback with the IV-S tape recorder that has FM pilot sync.

When the Nagra IV-S Time Code recorder was made Nagra supplied the QSLS INTERFACE to work with the QSLS SYNCHRONIZER.


To buy this item please telephone: Mike Harris: 01932 241948 and quote the reference number or Email mike.sound@btinternet.com