back to used gear

Product Ref B16

19" 1U RACK POWER DISTRIBUTION PANEL, MADE TO ORDER, THERE IS 3 X 1U PANELS TO CHOSE FROM

AS THE BATTERY BOX MINIMUM FUSE DEPENDS ON THE CHARGE RATE, ITS A BIGGER FUSE THAN IS NEEDED FOR MOST EQUIPMENT, SO THIS PANEL CAN BE FUSED AS REQUIRED AND HAVE AN L.E.D INDICATOR ON EACH FUSED SECTION. ALSO YOU CAN HAVE A VOLT METER OR AMP METER IN THIS PANEL AND A CHOSE OF CONNECTORS

THE CONNECTIONS USED ON THE BATTERIES

24 VOLTS battery box output with 4 pin XLR connectors is on PIN 1 NEG (-), PIN 3 POS (+) this lead has orange colour code

12 VOLTS battery box output with 4 pin XLR connectors is on PIN 1 NEG (-), PIN 4 POS (+) this lead has yellow colour code

24 VOLTS battery box output can be fitted with a 2 pin SPEAKON connectors PIN - 1 NEG (-), PIN + 1 POS (+) a 2 pin Speakon is preferred because you cannot plug 4 pin Speakon plug into it. The 4 pin is fitted to the 12 volt battery box

12 VOLTS battery box output is on a 4 pin SPEAKON connectors is on PIN -1 NEG (-), PIN + 1 POS (+)

The 4 pin NC4FX is a 9 amp connector so the box max fuse is 9 amp, if you would like a 20 amp output I can fit the SPEAKON connector

I can supply a Neutrik 4 pin to 4 pin 10 amp output leads £25

Neutrik 4 pin to 2 X 4 pin 10 amp output Y leads £35

Above leads with NC4MRX 4-pin XLR Right Angle plug add £3.50

Neutrik output lead 4 pin/m to 2 x Hi-ros 4 pin plug £50

Neutrik output lead 4 pin/m to 4 x Hi-ros 4 pin plug £75

4 pin to clips for charging your car battery £15


To buy this item please telephone: Mike Harris 01932 241 948, or click the contact button for more options.