back to used gear www.mikesfilmsound.com back to new gear page

Product Ref 16

AUDIO TECHNICA AT899C PROFESSIONAL TIECLIP MICROPHONE


Audio-Technica's omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

I will fit a plug free x the cost of plug below.

Lemo Standard 6 or 8 pin plugs £19.00, Mini 6 pin £9.30, Mini 4 pin £8.20, Sanded screw lock Jack £6.50, Sennheiser screw lock Jack £12.50,

Sony 4 pin Plug £ 45, Hi-rose/ Sony 4 pin plug £15.50, ( Lemo 3 pin plug £9.50 + £25 for fitting ) RT5F mini XLR socket, 5 Pin, in-line £5, or £5.50 for the water resistant type, TR3F 3 pin

SPECIFICATIONS

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Omnidirectional
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 250 ohms
Maximum Input Sound Level: Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)

Cable: 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
Accessories: AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case

Also available as:
AT899c - less power module; 55" (1.4 m) cable, unterminate
AT899c-TH - same as AT899c but in "theater" color (beige)
AT899cT4 - less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
AT899cT5 - less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system
AT899cT5-TH - same as AT899cT5 but in "theater" color (beige)
AT899cW - less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
AT899cW-TH - same as AT899cW but in "theater" color (beige)

see http://eu.audio-technica.com/en/search.asp?sa=AT899C&x=7&y=9


To buy this item please telephone: Mike Harris 01932 241 948, or click the contact button for more options.