ITEM 15 page updated 19-07-2020

CLICK ON USED GEAR TO GO BACK, OR UNDERLINED TO GO FOREWORD

Leads can be made up to order and are normally 1.5 meters long.

NEW MONO NAGRA LEADS,

see USED ORIGINAL NAGRA LEADS

To buy these items please see bottom of page


NEW LEADS FOR MONO NAGRA REEL TO REEL TAPE RECORDERS, III, IV.L D, E, 4.2. IS, & SN

PICTURES
TYPE
REF

MONO NAGRA BALANCED LINE OUTPUT LEAD

NAGRA BALANCED LINE OUTPUT 600 OHM 3PIN XLR LEAD for NAGRA MONO REEL TO REEL TAPE RECORDER
For NAGRA MODEL: - III, 4.L, 4.2, E, D, IS,

3 BANANA PLUGS TO MONO 3PIN XLR PLUGS,
THE 3 X BANANA PLUGS,

RED & GREEN TO THE TRANSFORMER OUTPUT FOR A BALANCED FULLY FLOATING OUTPUT, BLACK IS COMMON SCREEN & PLUGS INTO SCREEN OF THE LINE INPUT

TO USE AS A MONO UNBALANCED OUTPUT JUST PLUG THE GREEN INTO THE BLACK AND CONNECT TO THE TRANSFORMER OUTPUT

NML 1

 

£35

NAGRA III TO SLO SYNCHRONIZE LEADS

ORIGINAL PILOT AND SLO LEADS

NML 2

£65

SOLD

NAGRA III TO BM11 MIXER LEAD

OR NAGRA 4 TO BMT-3 MIXER LEAD

NAGRA III REEL TO REEL TAPE RECORDER

6 PIN BINDER PLUGS TO 6 PIN BINDER PLUGS

THIS LEAD FROM THE MIXER PLUG INTO A NAGRA 3 POWER SOCKET AND THE POWER SUPPLY LEAD PLUGS INTO THE BM11 MIXER

THIS LEAD WILL WORK IN A NAGRA 4, PLUGGED INTO THE ACC SOCKET BUT THE INPUTS WILL BE OUT OF PHASE WITH THE NAGRA MICROPHONE INPUTS, UNLESS THE MIXER HAS AN INTERNAL MOD TO WORK WITH THE NAGRA 4, OR USE THE NAGRA QCB ITEM UA69 IN ACCESSORIES, IF MIXER IS NOT MODIFIED FOR A NAGRA 4

NML 3

 

£45

NAGRA III HEADPHONE OUTPUT STEREO ADAPTER LEAD

NAGRA III REEL TO REEL TAPE RECORDER

2 WAY BANANA PLUGS TO STEREO 3.5 mm JACK SOCKET

STEREO HEADPHONE WILL BE MONO IN EACH EAR, THE BANANA ADAPTER IS A PIGGY BACK TYPE, SO A BANANA OFF TAPE OUTPUT LEAD, CAN BE PLUGGED INTO THE BACK

SUPPLIED FOR STEREO HEADPHONES

NML4

 

£30

 

 

 

NAGRA III HEADPHONE OUTPUT MONO ADAPTER LEAD

FOR NAGRA III REEL TO REEL TAPE RECORDER

2 WAY BANANA PLUGS TO STEREO OR MONO 1/4"JACK SOCKET

STEREO HEADPHONE WILL BE MONO TO EACH EAR, THE BANANA ADAPTER IS A PIGGY BACK TYPE, SO A BANANA OFF TAPE OUTPUT LEAD, CAN BE PLUGGED INTO THE BACK

SUPPLIED FOR STEREO OR MONO HEADPHONES

NML4A

 

£30

 

 

 

MONO NAGRA LINE INPUT OR OUTPUT LEAD FOR 4L 4.2 OR (IS) ON REEL-TO-REEL TAPE RECORDER.

THE RED BANANA PLUG WILL PLUG INTO THE SIDE OF THE OTHER RED BANANA PLUG AND THE BLACK INTO THE BLACK,

YOU CAN RECORD FROM STEREO EQUIPMENT WITH THE 2 RCA PHONO AND MONO THE BANANA PLUG, INTO THE RECORDER, OR PLAY BACK FROM THE MONO BANANA OUTPUT TO 2 RCA PHONO PLUGS INTO 2 CHANNELS OF A STEREO INPUT,

YOU WILL HEAR MONO ON BOTH SPEAKERS

2 X RCA PHONO PLUGS TO 2 SETS OF BANANA PLUGS, 1.5M LE
AD

NML5

 

£35

MONO NAGRA LINE INPUT OR OUTPUT LEAD FOR REEL-TO-REEL TAPE RECORDER.

Banana pluge to Banana plugs

Nagra III, 4.L, 4.2, IS & E

NML5A

 

£30

MONO NAGRA

INPUT & OUTPUT LEAD FOR NAGRA 111, IV-L, 4.2, E OR I.S REEL-TO-REEL TAPE RECORDER.

RCA PHONO PLUG TO BANANA PLUGS, 1.5 M LEAD

THE NAGRA BANANA LINE OUTPUT IS 4.4 VOLTS AND IS TO HIGH FOR SOME INPUTS

BUT YOU CAN USE LEAD REF; NML14

NML 6

 

£25

NAGRA SN / SNS

OUTPUT

THIS OUTPUT LEAD IS FOR THE NAGRA SN MINI MONO REEL-TO-REEL TAPE RECORDER.

MONO 3.5 JACK TO BANANA PLUGS TO USE FROM SN TO NAGRA III, 4, E or IS

MONO LEAD THAT IS 3.5 MONO JACK TWO BANANA PLUG, WITH THE C AND R IN THE JACK PLUG, THAT IS NEEDED TO MACH TO THE HEADPHONES OR LINE OUTPUTS AND BLOCK THE DC VOLTS

NML 7

 

£35

NAGRA SN / SNS

OUTPUT

 

THIS OUTPUT LEAD IS FOR THE NAGRA SN MINI MONO REEL-TO-REEL TAPE RECORDER.

MONO 3.5 JACK TO STEREO 3.5 JACK SOCKET, TO USE WITH STEREO HEADPHONES

MONO LEAD THAT IS 3.5 MONO JACK TO 3.5 STEREO JACK SOCKET, WITH THE C IN THE SOCKET AND R IN THE PLUG, THAT IS NEEDED TO MACH TO THE HEADPHONES AND BLOCK THE DC VOLTS

NML 8

 

£35

 

NML8A

WITH 1/4 JACK SOCKET

NAGRA SN/ SN-N/ SNS

OUTPUT

 

THIS OUTPUT LEAD IS FOR THE NAGRA SN MINI MONO REEL-TO-REEL TAPE RECORDER.

MONO LEAD THAT IS 3.5 MONO JACK TO 3PIN XLR PLUG, WITH THE C TO BLOCK THE DC VOLTS & R IN THE XLR THAT IS NEEDED TO MACH TO THE INPUTS, AS USED IN THE SN SCU ADAPTER LEAD.

NML9

 

£35

NAGRA SN/ SN-N / SNS

OUTPUT

 

THIS OUTPUT LEAD IS FOR THE NAGRA SN MINI MONO REEL-TO-REEL TAPE RECORDER.

MONO LEAD THAT IS 3.5 MONO JACK TO RCA PHONE PLUG, WITH THE C IN THE RCA AND R IN THE JACK PLUG, THE C & R IS NEEDED TO MACH TO MOST INPUTS, AS USED IN THE SN SCU ADAPTER LEAD.

NML10

 

£35

NAGRA SN / SN-N SNS

CAN BE CONNECTED FOR THE SN/ST OUTPUT

IF REQUESTED

THIS OUTPUT LEAD IS FOR THE NAGRA SN MINI MONO REEL-TO-REEL TAPE RECORDER.

MONO 3.5 JACK TO 2 RCA PHONO PLUGS, THE RCA PHONO PLUGS ARE MONO OUTPUTS, TO CONNECT TO A STEREO UNIT AND GET MONO IN BOTH CHANNELS

THIS LEAD HAS C AND R IN THE 3.5 JACK PLUG, THAT IS NEEDED TO MACH TO THE INPUTS AND BLOCK DC VOLTS, AS USED IN THE SN SCU ADAPTER LEAD.

NML 11

 

£35

MONO NAGRA OUTPUT

IT WILL GIVE YOU A 560 MV OUTPUT, INSTEAD OF A BANANA PLUG OUTPUT OF 4.4 VOLT

OUTPUT LEAD FOR NAGRA IV-L, 4.2 RECORDER.

7-PIN TUCHEL PLUG TO 3.5 STEREO JACK PLUG, 1.2 M LEAD. THIS LEAD CAN BE TO A 1/4 JACK

PLUG THIS LEAD INTO THE NAGRA MIXER SOCKET, IT WILL GIVE YOU OFF TAPE MONO OUTPUT IN TO A STEREO 3.5 JACK PLUG LINE INPUT

OUTPUT IMPEDANCE OF 100K AT 560MV

NML 12

 

£25

 

NML12A

FOR 1/4 JACK

MONO NAGRA INPUT

IT WILL GIVE YOU A 560 MV MONO INPUT FROM A STEREO JACK OUTPUT,

INPUT LEAD FOR NAGRA IV-L, 4.2 RECORDER.

6-PIN TUCHEL PLUG TO 3.5 STEREO JACK PLUG, 1.2 M LEAD. THIS LEAD CAN BE TO A 1/4 JACK

PLUG THIS LEAD INTO THE NAGRA MIXER SOCKET, IT WILL GIVE YOU MONO LINE INPUT FROM A STEREO 3.5 JACK PLUG

INPUT IMPEDANCE OF 9K AT 560MV

NML 13

 

£25

 

NML13A

FOR 1/4 JACK

MONO NAGRA

INPUT & OUTPUT LEAD FOR IV-L, 4.2 REEL-TO-REEL TAPE RECORDER.

7 PIN BINDER PLUG TO 2 RCA PHONO PLUGS, 1.5 M LEAD

RED PHONO IS INPUT AND BLACK PHONO IS PLAYBACK OUTPUT, PLUG THE 7 PIN BINDER PLUG INTO THE NAGRA MIXER SOCKET,

NML14

 

£30

2 WAY MONO OUTPUT LEAD

This lead is connected for 2 mono output from a Nagra 4 and will give you Playback output from tape at 560 mv from the mixer socket, if you are connecting to a stereo equipment it will give you mono on both channels

7 PIN BINDER PLUG TO 2 RCA PHONO PLUGS, 1.5 M LEAD

please note:- its playback only you will not get the direct output

NML 15

 

£30

2 WAY MONO INPUT LEAD

This lead is connected so a stereo output will be mono into a Nagra 4L or 4.2 and will give you line input of 560 mv into the ACC socket, if you are connecting to a stereo equipment it will mono both channels

6 PIN BINDER PLUG TO 2 RCA PHONO PLUGS, 1.5 M LEAD

 

NML 16

 

£30

MONO NAGRA LINE IN & OUT LEAD

RED JACK IS INPUT AND THE WHITE JACK IS OUTPUT

INPUT & OUTPUT LEAD FOR NAGRA IV-L, 4.2, E, REEL-TO-REEL TAPE RECORDER.

2 X 1/4 JAKE PLUG TO 7 PIN TUCHEL PLUGS, 1.5M LEAD

BUT YOU CAN USE LEAD REF; NML 8 ON A NAGRA 4 OR THE HEADPHONE OUTPUT ON A NAGRA III

NML 17

 

£30

 

MONO NAGRA BALANCED OUTPUT

BANANA PLUGS TO 1/4 STEREO JACK PLUG, 1.5 M LEAD. THIS LEAD CAN BE MADE TO A 3.5 JACK PLUG

CAN BE USED TO TRANSFER RECORDING TO IPAD OR COMPUTER

CAN BE USED AS A STEREO NAGRA OUTPUT FOR IV-S OR IV-SJ

OUTPUT UP TO 4.4 VOLT

NML18

 

£26

MONO NAGRA

INPUT & OUTPUT LEAD FOR NAGRA 111, IV-L, 4.2, E, OR I.S REEL-TO-REEL TAPE RECORDER.

1/4 JAKE PLUG TO BANANA PLUGS, 1.5 M LEAD

THE NAGRA BANANA LINE OUTPUT IS 4.4 VOLTS AND IS TO HIGH FOR SOME INPUTS

BUT YOU CAN USE LEAD REF; NML 17 ON A NAGRA 4 OR THE HEADPHONE OUTPUT ON A NAGRA III

can be fitted with a stereo jack this will give you mono to right and left tracks if you are connecting to an amp or mixer

NML 19

 

£25

 

 

NML 19A

WITH STEREO JACK

MONO NAGRA OUTPUT

OUTPUT LEAD FOR NAGRA 111, IV-L, 4.2, E OR I.S REEL-TO-REEL TAPE RECORDER.

XLR 3-PIN PLUG TO BANANA PLUGS,

1.5 M LEAD

THE NAGRA BANANA LINE OUTPUT IS 4.4 VOLTS AND IS TO HIGH FOR SOME INPUTS

 

£25

 

 

NML 20

MONO NAGRA INPUT

INPUT LEAD FOR NAGRA 111, IV-L, 4.2, E OR I.S REEL-TO-REEL TAPE RECORDER.

XLR 3-PIN SOCKET TO BANANA PLUGS, 1.5 M LEAD

 

£25

 

 

NML 21


To buy these item please Email Mike at mike.sound@btinternet.com with your order and your details, I will send you a quote, please use my reference numbers on your order. If you would like to continue, I will send an invoice with ways to pay, when payment is received you will be sent the tracking number as proof of posting